CNC Machine Prestart Checking Steps

Examine the oil levels. Both levels should be filled up to one inch from the bottom of the
reservoir. The spindle oil reservoir may have oil in it for up to six months. The way lube
oil reservoir may run out of oil in one week.

Visually inspect the air pressure gauge to verify that it is set to at least 80-100 PSI. Air
is used to change belt ranges in the spindle, orient the spindle, activate the tool in-out
cylinder, and it is, also, used for the air blast during a tool change. The tool changes
gauge should not exceed 120 PSI.


Raquel Gomez said...

CNC Machining is a process used in the manufacturing sector that involves the use of computers to control machine tools. Tools that can be controlled in this manner include lathes, mills, routers and grinders. CNC machine reduce the labor cost and helpful in to high production in quick time.

Himes Machinery


nice post.cnc machine used for both drilling and cutting and able to achieve many of the operations performed by cutting and drilling machines.Give more tips cnc vmc toolings

bradshaw john said...

Good information you have posted in this article post!!

ceramic machining services

Valley Design said...

This was a good information for cnc machine prestart checking steps. Thanks for sharing

glass dicing service

Post a Comment

Related Posts Plugin for WordPress, Blogger...