Drill and Facing in the process of machining centers

From Blogger Pictures
Meet again with my post, this time I want to discuss about the drill and facing. I find obstacles to use of the tool joint and drill facing (can be seen in the image above). At the same drill a hole through it is with the process of facing. Obstacle I faced was the age of the tools that I use can not last long (often broken)
Maybe it could be seen from the program like this:

N0300(INLET,S/F,D20.)
T3M6
G0G90G56X0Y0
G43Z10.H3S3300M3M8
G1Z3.F500T4
Z0.1F165
Z0S440F22
G4X0.5
G0Z50.
G91G28Z0M5M9M103

Note:
Z Zero To position contained in facing
Material is Aluminium casting

For that through this post I want to ask for help in finding a solution to the master's or designer of CNC tool

3 comments:

nas said...

i like articles..

Unknown said...

I'm as lost a you are. Our company uses plastic CNC machining from Plastic Engineering and their service allows us not to worry about this stuff much.

CNCJobs.Org.UK said...

CNC Programming Jobs in the UK are well paid

Post a Comment

Share |
Related Posts Plugin for WordPress, Blogger...